The Hydro-Pure® series deionizers offered two stages both co-flow and counter-flow deionizers for the applications in different industrial process. These systems are available in a versatile range of outputs from 1.0 m3/hr to 90 m3/hr.
The co-flow (HTS) range is developed to produce a cost-effective supply of good quality deionized water to meet a wide spectrum of customer needs. Particular emphasis has been placed on ease of operation, maintenance and service, plus features which enable users to easily check how the unit is performing.
The counter-flow (HCI) system is adopting an improved technique, which better water quality can be produced by these units. By using HCI system, a higher working capacity can be obtained from the ion exchange resin for a given regeneration level. Waste water is minimized, and the reduced volume of volume of water required during the regeneration cycle, together with the use of smaller effluent neutralization facilities, result in cost savings.
The ranges of Hydro-pure deionizers are skid mounted packaged units which are pressure tested and semi-commissioned before delivery. This considerably reduces installation time and the overall capital cost of plant.
Features:
- Designed for cost-effectiveness and efficiency in ion exchange.
- Skid-mounted Packaged Plant.
- Co-flow or counter-flow regeneration
Benifits:
- Competitive capital & running cost.
- Low installation cost and time.
- Higher quality water or lower costs on different requirement
- Cut down the outage time and less storage space is required
- Reduced operator involvement.
Options:
- Pre and post treatment.
- Duplex configuration.
- Effluent pH correction.
- Sequential regeneration.
- Manual and mixed bed unit.